Search results for: 'step small belay'

The Petzl ID is a self-braking descender with an anti-panic function built in. Learn More

Just Perfect Pole Steps : JP Step II

 

The JP Step I and JP Step II  are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples.  These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.

Learn More

Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps. This is the step only. These steps can replace common utility pole steps that have an upturned hook end.

Learn More

Just Perfect Pole Steps : JP Steps Removable utility pole and tree steps

Learn More

Detachable Pole and Tree Step, These are the preferred security steps for ropes challenge courses either rin trees or poles. Lag bolt and plate are installed into a ropes course pole or tree. Learn More

The Mega Jul Belay Kit with our Mega Jul belay device and the HMS Strike FG Carabiner. Learn More

An auto belay is an automatic belay device that eliminates the need for a human belayer. In the case of the Head Rush TRUBLUE Auto Belay, it uses Head Rush's patented self-regulating braking system, which is enabled by non-contacting magnetic braking technology. Learn More

This innovative, all-in-one Pulley/Auto belay for fall protection is lightweight and easy to use. Auto belay pulley Locks in either direction (right or left) while climbing up or down. Learn More

The GRIGRI 2 belay device with assisted braking is designed to facilitate belay maneuvers. Learn More

This manual rescue belay can be used as a self belay or with a belayer. The side plates and drum are made from heat treated 6061 T6 Aluminum while the two stainless steel pins keep the rope seperated as it is reaved around the drum. Drum is Aircraft Hard Anodized for extended wear which cost more but makes for a superior product. Learn More

Easy-to-operate semi-automatic belay device with assisted braking and maximum safety for sport and indoor climbing. Learn More

GREAT ECONOMICAL BELAY DEVICE. If you are looking for a good ATC style belay device, this is it: Cypher ARC Rappel and Belay Device. Crafted from high-density aircraft-grade aluminum, the ARC is engineered to keep your rope running smoothly through the device for quick payouts and long rappels. Learn More

Our new Ultrascenders are designed to be the most convenient, easiest to use and most comfortable ascenders around. We've added a new ergonomically designed safety mechanism which is integrated into the handle channel for maximum ease. Learn More

The Figure 8 by Omega Pacific remains a popular device for their simplicity, durability and dependability. Learn More

Hydrobot is a new tool conceived for Hydrobot is a new tool conceived for modern canyoning; can be used both with one or two ropes and it allows an easy changement of the braking under load. Learn More

Adjama Climbing Harness, Lightweight and very flexible, thanks to the Delta System leg loop front panels and small dimension leg buckles. Learn More

Petzl Paw Rigging Plate, Coming in three sizes for different set ups the PAW provides strong and lightweight organization for your rope set up. Learn More

Petzl Swivel, Positioned between the rope and the load, the ball-bearing Swivel S allows the load to turn without twisting the rope. Learn More

Rope Washer by CMI - The unique flow pattern created by CMI's exclusive ducting creates a spiraling, multi-jetting flow pattern that lifts dirt and contaminants out of rope better than conventional designs. Constructed from tough PVC, CMI's rope washer attaches to any standard spigot or garden hose. Learn More

The Cadillac is versatile enough to be used on big walls,zip line, but shines brightest on multi pitch and traditional routes. Constructed wide for comfort, the Cadillac incorporates an inner waist belt layer that spreads forces over 2.7 times more area Learn More

The Ballet 8 is one of the smallest and strongest mini 8's available. Equipped with Ears, it will serve as a rescue 8, personal escape device, or a regular rappel 8. Learn More

1-3/4" Nylon Webbing Ajustable Lanyards are used for protection on high ropes courses, adventure courses, industrial heights and a variety of home applications. Learn More

The Finesse climbing/zipline harness is designed specifically for women. It is slightly narrower and lighter than our Silhouette harness, making it a great choice for single pitch or sport climbing applications or even zipline runs. Learn More

Kong Victor Harness, New multi-purpose harness, ideal for climbing, ziplining, mountaineering via ferrata and climbing routes. Comfortable and breathable with adjustable leg loops and wide gear loops. Victor is come is 5 sizes (XS,S,M,L,XL) Learn More

The adjustable leg loops of the LUNA harness make it an ideal piece of equipment for mountaineering, ziplining, and ice climbing. Learn More

The elastic leg loops remain adjusted and offer complete freedom of movement. The DoubleBack Light buckle on the waistbelt ensures quick and easy adjustment. Learn More

The Head Rush TRUBLUE XL Auto Belay is fitted with a webbing that can be replaced in the field by the owner using the Replacement Webbing. Learn More

Robertson and Adventure Gear introduces the Total Transfer PT harness system, a combined transfer and therapy harness system that offers patients a new way to sit, stand, and walk without complex therapy harness transfer setups. Learn More

The SAMA harness is ideal for sport climbing and zip lining . With its EndoFrame construction, it provides excellent weight distribution around the waist and legs to ensure greater comfort. Learn More

Our most versatile belay and abseil device made of solid stainless steel for durability. Learn More

The Klein Haven Cable Grip is designed for use when a light, compact grip is desired and where zipline or other cable damage is not a factor. Gripping pressure of the knurled jaw s applied to ¼” of zipline cable area. Learn More

A compact, ultra-light belay and abseil device for half ropes and twin ropes. The only suitable device for use with the Flycatcher 6.9 mm. Learn More

Four-step etrier that attaches to an ASCENSION rope clamp for rope ascents or directly onto an anchor for progression in overhangs or roofs. Learn More

Yates Speed Wall Ladders are designed with the same configuration as the Big Wall Ladders but have 1" wide steps to reduce bulk and weight. Learn More

Yates Big Wall Ladder, Big Wall Ladders offer the simplicity of traditional 1" Etriers with the comfort of 2" Wall Etries. Built in spreader bar insures that steps remain open without causing foot pinching. Learn More

Climbing kit containing CORAX harness, belay system with Am'D carabiner and VERSO belay-rappel device, BANDI chalkbag and POWER BALL chalkball Learn More