Search results for: 'singing rope profil work 3'

This electric handheld unit cuts and fuses the ends of polyester and nylon ropes and webbing. Easy to use and long lasting blades. heats up when trigger is pulled and cools when released. Learn More

For hostile environments and maximum service life. Blue Anodized Aluminum sideplates, 2 3/8" Aluminum sheave, Bearing, and Stainless Steel axle. Learn More

The Ascension Ascender by Petzl is the benchmark for handled ascenders and has been refined to provide greater comfort; efficiency, ease of use. Learn More

Ferrules must be properly crimped to achieve holding strength. Properly swaged ferrules can hold 90% of cable strength. Two ferrules are required for life support and ziplining applications (ACCT Standards). Learn More

Intended for high-load applications that normally call for a lifeline, but also require a rope that floats, Learn More

This manual rescue belay can be used as a self belay or with a belayer. The side plates and drum are made from heat treated 6061 T6 Aluminum while the two stainless steel pins keep the rope seperated as it is reaved around the drum. Drum is Aircraft Hard Anodized for extended wear which cost more but makes for a superior product. Learn More

Petzl Gemini is a double Prusik pulley with moving side plates designed for technical hauling systems and raising heavy loads. Prusik pulleys are designed to be used with a Prusik hitch, making for a lightweight progress capture system. Learn More

Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More

Zip Line Super Swaged Compacted Cable / Wire Rope - Zip Line Super cable aka Swaged galvanized cable or compacted wire rope is now available! This incredible cable has at least five times the life of ordinary cable, 25% more strength, 10% faster, and runs 50-70% quieter than traditional cable! This is the wire rope to use for a smoth zipline ride.

Learn More

Special thermal treatment stabilizes the core strands and improves consistency; offers excellent grip and consistent handling over time. Learn More

EverFlex treatment: special thermal treatment stabilizes the core strands and improves consistency; offers excellent grip and consistent handling over time. Learn More

The RC-800 Wire Rope Cutters are used for cutting 1/16 to 5/8 inch cable. Learn More

Designed for use on Challenge ropes course/Zip Lining traverses, on cable or rope. Super strong with a 10,000 rating and a sheathed back up bolt. Stainless steel sides make this cable pulley bomb proof. Learn More

Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More

William Carabiner, Available with manual locking system (SCREW-LOCK) or automatic locking system (BALL-LOCK, TRIACT-LOCK). Learn More

1 1/2: Manila rope Learn More

Forged Nut Eye bolts are the backbone of ropes challenge course and zip line construction. Zip line and other cables are terminated to the eye bolt around a thimble to prevent cable deformation at the turn back. Learn More

A superior handling rescue rope, Teufelberger (New England) Ropes KM III static, kernmantle rope features a composite construction of nylon and polyester fibers. Learn More

Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More

The strongest and smallest cordellete or chock cord available. Tech Cord's 5mm diameter and 5,000 lbs. tensile strength is achieved using a unidirectional Technora core and a bombproof polyester sheath. Learn More

This is a great low profile SRD with a parallel attachment to easily align cable and belay loading. Super strong with a triple axle design and a thick folded plate design. Learn More

Steel carabiners are referred in ropes course, zip line, and cable applications. Learn More

Purple Anodized Aluminum sideplates, 1 1/4" Aluminum sheave, Bushing, and Stainless Steel axle. Learn More

Stainless Steel Thimbles, When the zip line wire rope is terminated with a loop, there is a risk that the wire rope can bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. Learn More

Liberty Modified "D" zip lining carabiners are heat-hardened to hold 50kN and nickle palted to withstand intense abuse. Screw gate, Twist Lock and our three-stage Auto lock versions give you the right tools to work and play safe. individually tested. Learn More

The Felco C16 Wire Cutter has a capacity of 5/8 in. diameter and smaller. This is the GO-TO zipline cable cutter in the industry. Felco cutters keep cutting for years longer than other cable cutters. Learn More

CMC now offers the standard utility scissors with titanium bonded blades. Using a patented process, titanium is bonded to a stainless steel core to produce a sharper, more corrosion resistant, longer lasting edge. Learn More

GUY ANCHORS- Helix Ground Anchors : 4" x 3/4" x 54" Learn More

GUY ANCHORS- Helix Ground Anchors : 6" x 3/4" x 66" Learn More

Cable Drop Plate, The lower 1" tie-in hole allows easy attachment of a carabiner or quicklinks. Hot dip galvanized for lasting durability. Cable drop plates are great for giant ladders, giant swings, rope climbs, tire crossings or just about any ropes course element Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More

Hot Dip galvanized steel. End fittings are Quenched and Tempered, bodies heat treated by normalizing. Forged jaw ends are fitted with bolts and nuts for 5/8" and pins and cotters on 3/4" sizes. Learn More